Making a Kite daily4info.blogspot.com

Flying a kite is good exercise and a lot of fun (even if you don’t get the kite up in the air).  

Instead of going out and buying a kite, make one instead.  You will need fabric (or very 

strong paper), strong glue, two wooden dowels and string.  

To begin, lay the two dowels in a cross position and use some of the string to lash the 

sticks together into that position.  You will do this by weaving the string in and out of the 

dowels.  Once the dowels are secure, put glue on the string and leave it to dry.  Once this 

is done you should have a strong frame for your kite.

The next step is to create a frame around your dowels using the string.  To make sure the 

string does not slip, cut a small notch at the end of each dowel.  Starting at one end, wrap 

the string around the dowel where the notch is and then bring the stringto the next dowel 

while keeping the string taut wrap it around the next dowel.  Continue until string is 

connecting all four dowels.  Again, put dabs of glue on the string where it meets the 

dowels and leave to dry.

Once you completed frame is dry, lay your fabric on the kite frame and cut it with an 

extra one inch on all sounds to wrap around the frame.  Use glue to secure the fabric 

around the kite frame.

The last step is to attach the string to the kite.  You will need to make what is called a 

bridle by attaching the string to the kite frame in two locations (they should be on 

opposite sides) in a loop formation.  Then attach the string you are going to use to fly the 

kite to the bridle.